Search results

  1. help diagnosing mystery sound

    hey, my front driver suspension makes an awful squeaking noise whenever it seems like i’m turning left and the suspension compresses, i tried the brake shims but it didn’t seem to help at all. it’s a really loud squeak and i can feel the vibration through the steering wheel. heres a video, it’s...
  2. front radiator support bracket removal

    hello, i'm trying to figure out if I can remove and replace my front radiator support bracket without disconnecting my radiator and ac condenser, I really don't want to have to drain and refill either of them. is it possible to put a new bracket on there without disconnecting anything?
  3. replacement si front bumper?

    anyone know where to get a good replacement front bumper for my 2020 si? had a bit of a fender bender and need to replace the full thing, i don’t mind if it isn’t painted
  4. help with hondata on honda hack

    hey yall. i’m having some issues getting hondata to work on my honda hack, it immediately says connection failed and kills the program, it did say connecting for a while but got stuck like that and had to be aborted. any ideas?
  5. best affordable oil temp gauge?

    does anyone have any recommendations for a decent oil temp gauge/reader? aem kits are like $200 which if it actually is the best seems to be worth it, but ProSport makes a decent looking kit for 60-70 and GlowShift also has one for slightly cheaper. are there any other kits out there closer to...
  6. power gains from wunderladen fuel pump upgrade?

    might purchase and install the wunderladen fuel pump upgrade before a dyno session and i’m wondering if there would be any noticeable gains from it? thanks https://www.twostepperformance.com/products/wunderladen-racing-in-tank-fuel-pump-upgrade-for-2016-honda-civic-1-5t
  7. easy guide for hondata on honda hack?

    does anyone have an easy to follow guide for getting hondata onto my honda hack? thanks :)
  8. recent w1 failures?

    has anyone heard of recent w1 failures? i’m considering getting their w1 bb option and have heard of a questionable past with the w1 before it was revised a while ago. curious if anyone has had major issues since?
  9. URGENT- Turbo Smoke

    I’ve just gotten my Si back from the shop after months of work, and unfortunately it is smoking like crazy. The shop says it is a turbo issue, since the car runs perfectly fine and was just Dyno tuned today. I will attach videos below. Is this an issue I can personally fix without fully removing...
  10. 326power wing on Coupe?

    Has anyone attempted to fit a 326power wing on the coupe yet? such a sick wing but would require some modification.
  11. HKS Recirculating BOV

    https://www.blackhawkjapan.com/products/hks-71008-ah009?rfsn=6500829.266c1e&_pos=3&_sid=5037447f9&_ss=r anyone have any experience with this kit? Kodawari on youtube has one on his, interested to not only see if the bov might be an issue even if tuned for but also if it'll fit on an Si.
  12. disassembled tail light coupe?

    has anyone taken apart the center tail light on the coupe? curious to see the construction, might try to make clears.
  13. retune after upgraded gears?

    do I need to retune after upgrading my gears? planning to get a max power dyno, then chilling on a lower power setting until i can upgrade my gears to sustainably handle it.
  14. Wrinkle painted inlet pipe?

    Has anyone painted their inlet pipe with wrinkle red? Was gonna do my valve cover and doing my PRL inlet would be pretty cool too.
  15. Full gear set replacements or just 3rd-4th?

    Hello! I'm upgrading a ton of stuff in my car, and going to be pushing around 360-400 wheel. I've heard that 3rd and 4th are definitely a weak point and need to be replaced, which RV6 has a kit for. But PPG has a kit for the 1st-4th gears for like 4k. Is it worth it to go for the PPG gearset...
  16. Has anyone had BC rods fail on them?

    About to purchase some BC ProH2K rods for my build, and I was wondering if anyone has had any fail on them and at what power level? Thank you!
  17. Everything included with the TSP Built Block

    Hello! I'm about to order the TSP built block, and I was wondering what parts are included that are not mentioned? I was told it did include and oil pan but it looks like it does not include one. Such as gaskets, like the rear cam case cover, or the oil strainer. Thank you!
  18. BC Pro Rods vs Saenz S Series

    Is there a notable difference between the Brian Crower ProH2K rods vs the Saenz S Series? Looking to sit happily in the mid to high 300 whp range.
  19. Flex fuel and GC+ on stock transmission?

    Hello! I was emailing Vega from Phearable, and talking about running my Vargas GC+ with flex fuel on a built TSP block. He said I could push 360 safely, which I think is pretty reasonable. Has anyone had any transmission issues pushing this much power? I have the TSP Type-R Retrofit clutch...
  20. Internal upgrades after catastrophic failure

    Unfortunately my piston exploded under boost, causing catastrophic damage to my block and rod, as well as oil squirter. Any ideas of internal upgrades during the rebuild to prevent something like this again? I’m running a Vargas GC+ turbo. I was looking at Saenz rods and JE pistons, as well as...


Top