I mean you'd pull the ignition coils so the car wouldn't run, just turn over and run the fuel pump to pump it out the line before the hpfp. Otherwise you'll need to transfer pump it out the tank and your car is going to smell like a gas bomb.
Couldn't you just disconnect the fuel line at the firewall connections and unplug the 4 ignition coils and slip a hose one the fuel line and spray it in a gas can?
Have you accessed your horn through that black trim on your ex-t or do you have to remove the bumper? I drilled through the crash bar and used an m8 bolt to aim one horn down for best fitment.
I think you'll like them! You'll need some female spade connections preferably insulated 8-$18 with or without the crimper kit and $10 for a pack of lever nuts. Those things are great.
https://www.amazon.com/s?k=wire+spade+crimp+kit&ref=nb_sb_noss
lever nuts
I can't speak for those specific horns but I've had horns in the past and didn't like the tone or sound level. They are also more directional so they sound louder if they're within line of site which isn't ideal. If they're an air horn with a compressor though they're proudly loud AF like one of...
If you're willing to do very minor custom wiring from the end of the factory connection to the new horn then any 12v horn will work. You can put up to 4 horns on the factory 10A fuse but most people do 2 for dual tone. I have a pair of hella supertones in the factory passenger side location and...
Awesome update. Ktuner did my speed correction last year but I was hoping they would add the feature so I could play with it myself. I thought I remember a little higher than 53% like upper 50s with CAPTS but I could be mistaken. I'll play around with it this weekend if I get a chance.
I saw a site had 45 listings for the wheel in "A" condition but like 42 links use the same 9 pictures so I'm sceptical that's the actual wheel.
https://www.oemwheelshop.com/search?page=1&q=2019%2A+civic%2A+si%2A&type=product
Because no good deed goes unpunishable, I loaned a friend my wheel for a week and it came back curbed. It's not that horrible but I'm petty. I have no scuffs on my 16 other wheels and I just cant. What is the cheapest place to buy a brand new 16-19 si wheel?
All those problems could be related to running on 3 cylinders, not necessarily from damage of the electrode bouncing around. If it didn't make it out the exhaust valve just blast it out with 120 psi for a minute or poke it with a lightly greased q tip to stick it or something. Just buy the other...
So the problem was pretty simple. The electrode broke off the spark plug and you were missfiring. The electrode blasting around in the cylinder isn't good but might not have been that big of deal honestly. You definitely need to get that out though. Try a small magnet stick and blasting it out...
What gear and RPM and speed is it happening? You should be in 4th when doing a pull at 50 or 60. Never 5th or 6th or the clutch might slip, among worse things.
You can add your car to the tuning thread and post datalog as mentioned. Attach files as .zip to post. You said you notice a lack of...
The extra weight would slow you down roll racing. The weight will negatively impact handling and sits pretty high so it will raise your center of gravity. It will reduce accessibility, be a pita to install, a pita to uninstall, reduce resale, provide questionable safety or even a potential...
Besides adding all the extra weight, a questionable cage could cause a hazard instead of preventing one. You'd be better off spending $300 on a helmet and fire suit. You might actually need it for an event some day too.
Question. What is yalls tps max? Mine has always been 115% when floored but I've had the acuity on position 2 since day one. Is it only 100% without the spacer?