Search results

So I recently installed some weathertech carmats and I noticed my tps only goes up to 95-97 % .Where as before with the original carmats it went up to 105%. If I remove the weathertech mats the tps can go up to 107%. Does it matter if the tps only goes 95%when I'm asking wot?Don't know if the...

I've been looking around and searching but only found some alignment specs .Mainly for street /track .Maybe we all can put it into 1 thread and see what works for most of us and what not. I'll start off with my specs Car: 2018 civic sedan 1.5t (euro spec) Lowering kit: ST X Coilovers Lowering...

I need to find a way to reduce my rear camber from -2° to -1.5° without using a adjustable camber arm. Why? My annual car inspection doesn't allow any camber adjusting arms if it isn't OEM. I was thinking of using a camber bolt on the camber arm bushing that is on the rear hub. Reason being...

I saw this video passing by from IZZE-racing who did some testing with their brake rotor temp sensors.Really cool to see how the rotors heat up. This was on a S2000 with urge designs brakes ,so the rear rotors are vented and not solid.S2000's are known to overheat in the back.

In tunerview my speed is off from my dash speed .Is this normal or is there a way to fix this?When I'm driving 120km/h my tunerview says 115km/h. Also the brake pressure readout doesn't work, but I can read it if I plug in a obd2 reader.

I currently have 18 x 8.5" , ET34 wheels which after lowering (-35mm / -1.4" ) with coilovers still rubbed the fender tab. Did the Tab mod and that rubbing was gone. Now when really pushing the car or coming from high speed corners it still rubs sometimes under compression. This might be the...

Are there other people interested in a Wunderladen racing oil pan baffle for the euro spec oil pan? I myself mainly want it as fail safety for when I go to track days. And if anyone can get a used oil pan for not a lot money ? Preferably with the sensor . I have been looking online but most are...

For those in Europe ( and maybe also in the USA ? )i recently saw the Maxton Design now also makes a kit for the Sport Hatch and regular sedan ?! I know they made them for the Type R but since this year also the regular models.I hate that i just now modified a HFP or euro spec Honda acces lip...

So I have been doing some test with a maf sensor heat shield. The results were that the difference between IAT and IAT2 were less then before. Meaning the maf sensor stays hotter.(which is weird) Now I noticed with the stock airbox and stock hood rubber air guide it directs airflow away from the...

So I'm having this brake problem for a long time now. Ever since I changed out the brake pads with ate ceramic pads (oe replacement) and brembo oe replacement discs. (The front brake pads are rated GH and rear ones FG).In the morning when I start driving the first few km or miles the car shakes...

Are there people that had their Input shaft bearing fail /make noise? I only have 80000km daily drive my car and occasionally have some WOT runs on the highway.My ISB bearing started to make a whine noise lately. A few 1000km ago changed transmission oil with amsoil .Never noticed the noise...

Does anyone here use Endless mx72 pads all year around also in winter weather? I like to get these pads but have seen a few reviews of people saying they leave deposits on the brake disc and even rust in winter weather?They work fine with warmer weather .

So i've been looking into using the front fog light as a ram air/ Cold air source to feed air for my intake. We all know this comes with the risk of water getting sucked up as it rains or even worse hydrolock driving true a big water puddle. After some research i've found 2 options so far : 1)...

Has anyone ever removed their fog lights permanently? Does it need to have a resistor in place for it to not throw a code? I'm thinking of removing the fog lights and installing a cold air feed in place.I never use the fog lights and they are already pretty much sandblasted from all the highway...

Are there FK8 owners who replaced their stock upper engine mounts because the oem rubber bushings was cracked? I'm currently looking into maybe installing oem fk8 mounts into my 2018 civic sedan 1.5T .My Oem mounts are fluid filled and stock type R are rubber . After searching for some low...

Does anybody know if the fk8 motor mounts (left and right) also fit on a 1.5T 10th gen? I know the lower torque mount fits and that all the bolts from the upper motor mounts are exactly the same between the fk8 and a regular civic 10th gen .The normal civic has fluid filled motor mounts and...

So I recently saw a post of the guys from Honed who tested the front macpherson suspension on the GD3 jazz/fit .Which showed that it actually gained positive camber when the suspension got compressed.In comparison the old eg/ek civic with double wishbones always gained negative camber. This...

I'm looking for a Oem SI rear swaybar. Looking for someone who can ship this outside the USA true ebay with the ebay global shipping program. I have used this several times and bought several other parts from users on here before all without any problems. You only need to ship to a shipping...

I still have a PRL short ram intake for 1.5T (street maf) with a brand new Sprint filter cone filter for sale if anyone is looking for one in europe?I used this intake a couple of times for testing ,the filter is used 1 or 2 times and is nearly new. I can ship true whole of europe ,i'm from...

Does anyone else have problems with the OEM GPS acting up and giving a bad gps signal? My gps worked perfectly up until a few weeks ago.When riding the gps signal is aprox. 100meters to the right of where i am. Which results my gps constantly saying to take another route or turn around and so...