Yeah, when they wanted to charge me for a new condenser, I asked if they would refund the cost of the first recharge. When they did the recharge with dye, I asked them to put in the notes that they would refund the cost if the leak was found. They tried to claim that the rock damage wasn't the...
I have a 2016 Touring sedan bought in Nov 2015. Car has been great except last September when on a road trip we noticed that the A/C wasn't blowing cold air. Took it to the dealer and they could not find a leak. They charged me $200 to recharge it and they put some dye in it and said to bring it...
I washed with Chemical Guys Citrus Wash and Gloss using two bucket method for the wash. I used their Diablo gel to clean the rims and wheels. Butter wet wax on the paint, headlights, and taillights. And finally their new car shine dressing on the tires and black trim.
Not sure if it's the source of the rattle you are hearing, but I cut a strip of foam about 3" by 6" and wrapped it around the cylindrical seat belt mechanism. The other fix I later did which yielded more permanent results was putting sorbothane bumpers between the rear deck and the glass.
More...
My dealer recently came up with a service package for minder item "B" which is "Engine Oil & Filter change with Honda Inspection" for $164.95. The individual item that includes oil and filter change is only $39.95, which is what I have been paying for minder item "B" for years. I guess it's a...
Between the sorbothane around the brake light and sponge neoprene foam under it I have zero rattle even at really high volumes. It's lasted about 9 months so far.
Thanks for this analysis. Early on I added dynamat to a lot of the deck's metal frame, I assume that has helped reduce the rattle along with the sorbothane and foam. I'm sure an aftermarket sub will be much better, but my wife won't give up the trunk space.
Thanks for the feedback. In addition to the four bumpers around the break light, I've removed the foam that I had between the glass and the deck and put in four more bumpers. I've found that having the bumpers on top and the foam underneath the break light has resulted in zero buzzing or...