Finally got my 3 sets of injectors back from Injector Rx. Cleaned and tested to near factory condition. Took a hot minute but.... here we are.
First two sets are sold! Last set is still up for grabs. These are NOT just out of a trashed motor. Injector Rx gave me spection/flow rate data as...
Just messing with you….. but while I got your attention I am selling an unused PTP Turbo blanket for the T25/28 frame turbos.
I was going to use it for my turbo setup but switched turbos anyways. This is BNIB.
New they are $175. I will ship it to you for $100.
Model is FPRO35-028-01.
LMK
Ive searched for a while now on several Honda sites.
Anyone know the part number for the plastic piece that is a part of the front bumper that covers the small strip in front of the hood? (when closed)
Not exactly this piece but the piece that is visible.
So I had a wheel bearing that was starting to creep.. Slowly making noise, so I replaced it. Pressed the old out, cleaned it all up, greased all the assembly points and put it back together. Brakes were untouched and hung to the side. ABS sensor had to be removed to press the bearing in. Start...
20 CTR short base shifter $48 New
Acuity base bushings $29 New
Acuity Centering Spring $24 New
Acuity Shifter Rocker $108 New
Perrin shift cable lockdown $76 New
All of the bolts and parts are with it!
I can ship it all for $125.
Got tuned down at IMW today with Derek.
Pretty stoked to hit 392 Horsepower.
A lot of time and effort culminating to finally seeing this through. Pretty excited at the outcome.
That’s it! Just that.
Ready to start tracking this pig.
Who is going to HDay in Epping New Hampshire on the weekend of Aug 12 and 13 ?
wondering if anyone wanted to meet somewhere and roll in together?
I am game for whatever!
Please share!
FS: PRL Street MAF with 4 PRL Silicon Hoses and PRL cone filter.
Only selling altogether. No I will not separate.
Make a short ram. Make a long ram. Whatever you want to do with them!
$250 and we split shipping.
PRL Titanium Turbo Inlet Pipe for sale.
Yes! I attempted anodizing myself. Whatever! Call it custom. Looks fine and works flawlessly.
$300 and we split shipping.
Clearing out some stuff before the next build.
27Won CATTED DP for Si. Used for about 4,000 miles. Near perfect! $350 and we split the shipping. Heat wrapping is free! ;)
PTP Heat blanket. Used for 2,000 miles. $100 Shipped.
Type R Engine Cover. Painted yellow and not Spoon! $90 Shipped...
Has anyone installed this fuel line kit? Are their any reliable data points or thoughts? I upgraded my fuel system to handle more flow and wondered if this would hurt.
LMK Thanks
I have a Garrett 2860 RS turbo for the Si platform for sale. This is one of the turbo options you could buy for the PRL Big Turbo Kit, when this was a free country. I wanted a different power curve than what this offers so this one is for sale. Roughly 3,500 miles on it so still a young pup...
To anyone running a PRL Big Turbo Kit............ does anyone make a heat blanket for these Garretts?
Please let me know with a link or name.
Thanks in advance
So I just bought the Fuel Upgrade Kit from Axion Industries today. The kit comes with the DW300c pump. I have ready many threads where these are mentioned as crap. OK! No problem!
I have also read that AEM makes some pretty serious pumps, and it their price-point, I'll play ball.
My intention...
Anyone else notice that Axion Industries fell off the sponsor page of this forum?
Also, Axion Industries website carries a lot of the 10th Gen platform stuff now. They literally carry pages of our stuff, something they did not a at the end of 2022.
They are ramping up but it appears, at least...
So this is for #TSP mostly but whoever can assist.
Skunk2 released their new cams for the L15B7 but they require a “high lift” valve spring. Accordingly they are selling these magic springs as well. No dimensions are mentioned.
Do the BC racing springs count as “high lift”?
I ask because I...
So I bought a aftermarket hood from CA. My intent is to help with cooling in the summer months on the track mostly. This was a cheap hood and I knew the quality was not great. It is fiberglass. I also knew that my other option was to cut up my OEM hood. No bueno!
So I got the hood and , of...
Does anyone have a "turbo guy"? Like a friend who is super good with trubos and questions around them? As in, technical questions and such?
Please share.
Appreciate the help.
I am looking for anyone interested in selling their Motec M142.
Apparently there is a 8 month wait for Motec from overseas currently.
Please DM me if you are looking to sell yours.
Thanks