Search results

Custom made fiberglass 10” sealed sub boxes for 10th Gen Civic. Original cost $900 for the pair. Asking $450 for the pair (subs not included). Will consider selling both JL 10W6 separately. Subs are two years old but didn’t have much use. $700 for the pair. If it’s listed, it’s available...

I'm going to have the motor out shortly and will be swapping in an RV6 clutch / flywheel. I went on RV6's web page, but as far as I can see I don't see a clutch kit from RV6 for my Si. Maybe I'm looking at this wrong. I thought RV6 would be the brand of the clutch. Could it be I need to look at...

Ok, so I went through water yesterday (South Florida has been having flooding), not going to go into why I did it; I fucked up, period. I was crawling through the street; car shut off. I know the possible hydrolock, and decided to just tow it to the dealer and not mess with the steps to try to...

PRL CAI. I drove through a flooded street and car shut off The water was just below the bottom door jam, so I estimated I’d go through. What should be he next steps be when I get it home? Check oil for water? Pull plugs? If it ends up being an insurance claims, has anyone gone through...

I need to raise my rear coilovers about 1". The process appears straight forward based on what I've seen online. My question is how do you measure the amount you're raising it? Every video says "place a piece a tape to know how many turns". That's not going to give me the measurement. I'm...

Skid plate sagging I've replaced the front skid plate with the Badannlv skid plate a few months ago, but apparently when I damaged the original one, it must've pushed the rest of the black plastic skid plate (Cover assembly, lower is the official description) and it's already hit the ground a...

I’m in need of the fasteners for the Cover Assembly, Engine, (Lower) "shield". Somehow it appears I’m missing a threaded fastener on each side and a number of other fasteners. This is the larger plastic shield I’m talking about, not the front splash guard many of us have torn up. Any ideas on...

[EDIT] - Can’t delete thread, but there’s an updated thread. The skid plate isn’t torn up as I initially thought. Sets in the new thread. Deleted thread

Well, I changed mine to an aftermarket (forget the name) one a few months ago and it's the best... Now the second part of the carriage underbelly is hanging more than ever..... I'm planning on buying some metal zip ties from Amazon, but.... Now, I'm entertaining just ripping the mother fucker...

TL;DNR - Thinking of going with 18x9.5 +38 & 255-35-18 tires. A tad concerned about rubbing. ‘19 Si sedan. Currently on stock wheels, 20mm hubcentric spacers, & BC coil overs. I’ve been reviewing the most popular aftermarket wheel specs for a while & it appears to be 18x9.5 +38. I’ve tracked...

TL;DNR - Thinking of going with 18x9.5 +38 & 255-35-18 tires. A tad concerned about rubbing. ‘19 Si sedan. Currently in stock wheels & BC coil overs. I’ve been tracking the most popular aftermarket wheel specs for a while & it appears to be 18x9.5 +38. I’ve tracked the car 2-3 times with no...

Ordered BC Racing coilovers (Si) and have a few questions, after going through the archives. If you don't have an answer to all the questions, pick a number and help a brother out :). Has anyone come up with a resistor or alternative to trick the system into thinking the ADS is working? Many...

N/A

N/A haven't figured out how to delete threads..

N/A

N/A

N/A

N/A

CarPlay cuts out once in a while and it’s been more frequent lately. I have changed the cable. It’s happening with two cells….. Any ideas? I really don’t want to have to get one of those Chinese aftermarket Joy or whatever they’re called radios. The radio will work fine. A little bit later...

Well, it happened... my skid plate shredded. I had taken it off about 2 weeks prior to install my dp/fp & all was fine.... I think it was a dip in the highway at about 100 & my Si is lowered.. I could've left a fastener loose? Maybe. Looking at the archives I see badannlv being mentioned. Who...