Search results

  1. New York FS: Titan 7 TS-5 18x9.5 5x120 +45 w/Michelin Pilot Sport Cup 2 Connect Tires and OWL Titanium Lugs (Saratoga Springs, NY)

    Selling a set of Titan 7 TS-5 black wheels in Like New condition. No visible marks. Wheels come wrapped in Michelin Pilot Sport Cup 2 Connect Tires, each with 6/32nd inch of tread remaining. I'm told that one of the tires has a nail in the tread - unclear if patchable but selling as is...
  2. Preparing tuned car for a California Relocation

    I have a full bolt on FK8 currently tuned on 93 by DRob. I recently accepted a new job that will have me moving from NY to SoCal, and I'm wondering - do I need to completely return to stock to pass emissions? How do other SoCal owners with tuned cars get inspected?
  3. New York WTB - OEM front swaybar end links and ball joints

    I'm returning my car to stock, and can't seem to find my OEM front end links or ball joints. Currently have White line adjustable end links and Hard Race adjustable ball joints (for adding front camber). Will accept OEM parts plus cash, or OEM parts straight up.
  4. Do you guys running 18's find that 265/35R18 gets squirrelly sometimes?

    I recently switched from the OEM wheels/tires to a set of 18 inch Titan 7's wrapped in the new Michelin Cup 2 Connects (265/35). While putting them through their paces, I found that while they definitely seem to have a lot of grip under hard cornering, the turn in is much less sharp than the...
  5. Target Tire Pressure on 18's?

    I recently downsized to 18's from the OEM 20's, but upgraded in the process from the stock Conti's to the new Michelin Sport Cup 2 Connects. Based on the change in Load Index, most calculators are telling me that I should be running only 28PSI in the front, but even 35PSI felt a little soft and...
  6. Re-enabling O2 sensor for inspection

    If someone hypothetically had an aftermarket DP with a defouler and was running a tune with their O2 sensor disabled, what would the process be for getting the O2 sensor to ready as "Ready" for NY State inspections? They would have hypothetically already re-enabled the sensor in Flashpro Manager...
  7. Looking for a stiffer tire than PS4S for the street

    Im switching my summers to 18's due to my OEM wheels being mangled beyond belief. My very top priority is maintaining as stiff or stiffer steering feel and turn in as stock, and I'm told that PS4S is a bit softer (which, with the larger sidewalls to boot, would kill the experience for me). I'm...
  8. Target price for having a resonator welded in?

    I'm currently struggling to find a place in my area who can weld a Vibrant Resonator onto my Remus Exhaust for a good price. Everyone that I've talked to in the Type R Facebook groups seem to tell me that I shouldn't pay more than $100, but the only locations near me that will do it for that...
  9. Does tire wear/different tires change steering feel?

    I drove a brand new Type R the other day and was surprised at how much stiffer and more confidence inspiring the steering was over mine. Both 2019. The only thing I can think of is that his OEM tires are 100% new, versus mine which are at half-life or less. I also noticed a similar reduction in...
  10. Flashpro: Engine stuttering after flash

    I needed to datalog something on the factory tune, so using Flashpro, I flashed my 2019 Type R back to stock. Upon firing it back up, the engine immediately started sputtering at idle. I turned it off and attempted to flash to a base map that I had used before instead. Upon firing it up it...
  11. Relatively Quiet 3 inch Exhaust Recommendations?

    I've been running a Remus exhaust and front pipe for just over a year now. It was decent when I was on the stock downpipe, but since I moved to a aftermarket high-flow catted downpipe, it's become unbearably loud and raspy. Since I find myself running around with the valve completely close most...
  12. Anyone have any experience with Aeroflow Dynamics window visors?

    They appear to be in the same style as Mugen, but are $100 cheaper. Anyone run these?
  13. Looking for RV6 Rear Sway Bar Impressions

    As I get more into track driving, I'm looking into upgrading to an RV6 rear sway bar. My primary goal is to improve turn in response. I've read that upgrading to a stiffer rear sway bar is a good way to increase rotation in high-speed corners; at my current skill level though, I'd prefer to...
  14. Those that switched to 18's: any change in steering feel?

    I've read that one of the advantages of the factory 20's is that they make the steering feel stiffer and more direct. I've also read that some think that wider tires on 18's actually give you stiffer steering, since there's more contact patch. I'm at the point where I need to replace my stock...
  15. Is Getting Tuned in the Summer a Mistake?

    Hi all. I'm at my local custom tuner (well regarded by all, including Derek), and we seem to be having difficulty making any additional power beyond the Hondata basemap. I'm currently full bolt on with intercooler and exhaust, including the PRL inlet pipe and charge pipe kits. We baselined at...
  16. O2 Sensor Extension Recommendation?

    Howdy all. I recently switched from a 90 degree angled defouler to a straight defouler on my RV6 catted down pipe. Unfortunately, my O2 sensor wire no longer reaches. I'd prefer not to have to splice wires. Are there any compatible O2 sensor extensions that work with our car?
  17. Where is the variable steering stiffness controlled from?

    Hi all. I'd read that the new Limited Edition Phoenix Yellow Type R will come with revised steering stiffness in each mode. My question is, where is this logic stored? Is it maintained on the ECU, or is there a separate logic unit that controls this? I'm hoping to swap out for the LE's steering...
  18. FS: OEM Civic Coupe Rubber Floor Mats

    Selling a set of four OEM Rubber floor mats for the 2016+ Civic Coupe. These will fit in any of the coupe models, including the SI. They're basically in mint condition, because I only had the car for a short time. $40, free pickup (Upstate NY). Willing to ship at your cost.
  19. How does switching to a heavier shift knob change shifter feel?

    I'm looking into getting a WC Latheworks metal shift knob. I'm considering getting either the Titanium option, which is around 2x the stock weight, or the Steel option, which is at least 3x the stock weight. I'm weird in that I generally prefer the super smooth (if somewhat vague) shifter feel...
  20. Anyone Running EMan’s Modified CMC?

    I grinded second for the first time yesterday when getting on it. I realized that it’s because it physically won’t enter 2nd gear at higher RPM’s unless I wait with the shifter against the gate for a little. Then, after half a second or so, it slots in. So if I’m trying to shift quickly, it’s...
Top