Search results

  1. Need new rotors for the type R

    We have OEM rotors on our website if you would like to check there. Same with OEM pads. Here is the link. They are closer to the bottom of the page, front and rear https://prlmotorsports.com/collections/collection-vendor-brake-rotors
  2. 1.5T PRL Motorsports 10th Gen Civic 1.5T Drop-In Turbocharger Upgrade Development

    A few months back we compared Honda's 10th Gen and 11th Gen Civic’s (which is also the same as the 2023+ Acura Integra) turbochargers, discussed turbocharger measurements/specifications and mentioned that we would be developing a 100% drop-in turbocharger upgrade for these platforms. Today we...
  3. PRL Motorsports 10th Gen Civic 1.5T Drop-In Turbocharger Upgrade Development

    A few months back we compared Honda's 10th Gen and 11th Gen Civic’s (which is also the same as the 2023+ Acura Integra) turbochargers, discussed turbocharger measurements/specifications and mentioned that we would be developing a 100% drop-in turbocharger upgrade for these platforms. Today we...
  4. PRL Motorsports Air / Oil Separator Product Development - Revisited

    We should have some news dropping very soon! Just finishing up some of the final touches. We haven't seen any notable advantage to doing an oleophobic coating on the AOS system.
  5. PRL Motorsports Air / Oil Separator Product Development - Revisited

    In our very first design of this product we did look into this option. From what we gathered we did see a slight benefit in doing this. However doing so would about double the cost of this kit, add a lot of complexity to the install, and clutter up the engine bay with all of the lines. We...
  6. PRL Motorsports Air / Oil Separator Product Development - Revisited

    We currently have these being tested right now and we have a couple units out at anodizing now getting finished up. It looks like we should be able to start shipping these in about 2 months
  7. 1.5T PRL Motorsports 10th Gen Civic 1.5T Drop-In Turbocharger Upgrade Development

    Our expected stock is still on target for late September, which hasn't changed since we've put the note on our site a few months back. However, @Two Step Performance has plenty of these in stock. TSP purchased our first full batch of these when we reopened orders. We totally understand and...
  8. 1.5T PRL Motorsports 10th Gen Civic 1.5T Drop-In Turbocharger Upgrade Development

    Over the past few months our team has been working to develop drop-in turbocharger upgrades for both the 10th and 11th Gen Civic platforms. During our development, we've discussed the similarities and differences between each factory turbocharger (read more below): Blog Posts: Blog Post 1 Blog...
  9. PRL Motorsports 10th Gen Civic 1.5T Drop-In Turbocharger Upgrade Development

    Over the past few months our team has been working to develop drop-in turbocharger upgrades for both the 10th and 11th Gen Civic platforms. During our development, we've discussed the similarities and differences between each factory turbocharger (read more below): Blog Posts: Blog Post 1 Blog...
  10. Oil change and oil catch can.

    Hey everyone for anyone who is questioning the need for a catch can, this blog post may help you out. We are still in the process of testing our new catch can design and should have a pre order date available pretty soon. Here is the link for the article...
  11. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Here's a first official look at our Helix Air Oil Separator (patent pending) functioning prototype! This AOS will be compatible with most modern Honda/Acura applications. We are still on target to have these available by the end of this summer. Stay tuned for pricing and expected release date.
  12. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Thank you! Unfortunately we will most likely not be letting these ship without anodizing to help keep these looking pretty down the road. We worry that the outside elements will cause corrosion to the uncoated can.
  13. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Here's a first official look at our Helix Air Oil Separator (patent pending) functioning prototype! This AOS will be compatible with most modern Honda/Acura applications. We are still on target to have these available by the end of this summer. Stay tuned for pricing and expected release date.
  14. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Awesome! Yes, same concept, except this one can be equipped with our additional petcock kit for easy draining! (peep the port on the bottom of the can).
  15. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Here's a first official look at our Helix Air Oil Separator (patent pending) functioning prototype! This AOS will be compatible with most modern Honda/Acura applications. We are still on target to have these available by the end of this summer. Stay tuned for pricing and expected release date.
  16. Trying to make a choice on intake from Amazon

    Can confirm ;) We have the Cobra intakes in stock and ready to go right now! Feel free to shoot us an email and we can get you set up with an order. [email protected]
  17. 2023 Pittsburgh (PA) Vintage Grand Prix Cruise - PRL Motorsports!

    Calling all Honda & Acura Enthusiasts! We are excited to announce that in an effort to reach out and connect more personally with the our local community here in the Pittsburgh area that we are hosting a little get together Cruisin' to the Races meet and greet here at our new facility! We are...
  18. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Here's a little update from today - we're currently running our first small batch of prototype samples for final testing before starting a full production run and sending off to anodizing. How does she look?
  19. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Here's a little update from today - we're currently running our first small batch of prototype samples for final testing before starting a full production run and sending off to anodizing. How does she look?
  20. PRL Motorsports Air / Oil Separator Product Development - Revisited

    Here's a little update from today - we're currently running our first small batch of prototype samples for final testing before starting a full production run and sending off to anodizing. How does she look?
Top