Search results

  1. Suggestions for pedal set

    You can replace the whole pedals assembly with aftermarket stuff?
  2. Accessory mode staying on after shutting off car

    The only thing that could make that situation appear in normal operation is if you failed to put the transmission on park...you did put it on park right?
  3. 10th gen civic unlocks/locks while at car wash

    its exaclty the reason why, mine does that too.
  4. 10th gen civic randomly locks/unlocks while at car wash

    Yes mine do that all the time its because the detector on the outside door handle (the thing that makes the door unlock when you put your hand on the door handle) react to water....leave your car unlocked when you wash it, problem solved. The auto lock feature can be adjusted from the...
  5. Did you guys know the 2021 FK8 is faster than the previous version.

    ...or, maybe they just found a better driver this year? 😂 or he had the wind in his back?
  6. What did you do to your Civic today? (II)

    Turns out, i tried 1 layer and it quickly turned to yellow, but then i tried 2 layers of yellow film and it's absolutely perfect in terms of color and hue....it's BEAUTIFUL! :) My galaxy S9 doesn't make it justice, honestly i'm no photographer so it could probably do better... i used the...
  7. What did you do to your Civic today? (II)

    i drive my car during winter so i need to protect the lenses otherwise in just 3 or 4 years they will look like this: so for me film is a must yellow LED and yellow tint would get your vote? :) Matter of fact i'm gonna cut some yellow film tonight just to try on even if the install is not...
  8. What did you do to your Civic today? (II)

    Installed LED low beams, wow it looks much better...interior lighting is already all done in white LED too. But now i must do something for the fog lights, i have a lot of yellow tint films in house to try but i'm not sure about the bulb, i don't know if the stock bulb can look ok with a yellow...
  9. Removal of dealer decal (and other questions)

    That's a good way to peel a chunk of paint along with it, especially OP is a white 2017 model... Always be careful around cars with pressure washers...especially commercial ones sometimes they are more powerful than you think and can damage your car if you use them too close...especially on cars...
  10. Heavy Hood! Si

    that made me laugh hard 😂
  11. Removal of dealer decal (and other questions)

    Beyond that, the most important with your vinyl job around the windows is the outside temperature, too hot or too cold will both give you a harder time.
  12. Interior Led Light Strip

    Exaclty that, and use good quality 3m tape not some knock off, or worse some pre applied stuff (they always use trash tape) I use this one, if you remove all the greasy stuff with alcool (dish soap and warm water with a rag can do as well if you don't have alcool) and use a hair dryer to heat...
  13. Removal of dealer decal (and other questions)

    1- heat it up with a hair dryer slightly (NOT A HEAT GUN) and go at it with your nails, then finish cleaning it with a microfiber cloth and some alcool. (DONT USE CHEMICALS LIKE GOO GONE OR OTHER THEY CAN RUIN YOU CLEAR COAT) 2- I changed it on mine, i used a small flat head screw driver to pry...
  14. Exterior Mods for My 10th gen

    A set of 20mm spacers would push your wheels out a bit for a more flush look, especially if you have lowering springs it would look nice.
  15. What did you do to your Civic today? (II)

    YES!!! me too... https://www.holley.com/products/ignition/ignition_coils/late_model_coil_packs/honda-acura/parts/82494 Worth it? Anyone? They look really cool...
  16. What did you do to your Civic today? (II)

    Nice ride! Very classy...love the tint on your rear lights, we look to do it on mine they also have a clear portion. i have the same set of side markers on my car and i did tried them with the white LED that came with the kit...thankfully i installed mine at night i found they were way too...
  17. Hey aftermarket companies - rear spoiler needed - help us sedan owners!

    Personally i think rhe oem HFP wing look way better..
  18. 8th Gen SI axle back on Non si

    There you go :) https://www.9thgencivic.com/
  19. Spiked lug nuts poll.

    Personally I don't like em...thankfully they can just be not installed.
  20. [Solved]I don't see more extreme variations on tire and wheel size in most of the related threads. Why?

    Well up here winter is pretty heavy...so normally i install them around mid november and they can be removed in April. Winter tires are mandatory in Québec from december 1st to march 15th...police better not catch you in summer or all season during those months. Here just took a quick pic to...


Advertisement
Top