Search results

  1. Blitz AERO SPEED R-Concept Install

    Ah I see. So you don't need to drill into the actual bumper either?
  2. Blitz AERO SPEED R-Concept Install

    Did you have to cut/drill into the black front spoiler on the bumper where it mounts? Do you have photos when you were in the process of installing it?
  3. 27WON Front Strut Tower Bar

    Hm, then does it mean that when you need to change out the battery you'll need to remove the strut bar?
  4. PDR guy drilled a hole behind taillight?

    It's just a generic plug. Just take it out and repaint the drilled part. No need to fret, I think you're over thinking things. 😂
  5. What did you do to your Civic today? (II)

    Did you have to trim or remove the stock Sport lip?
  6. Dented 2020 Civic Si

    I think PDR can get that out about 80-90%, and then just polish out the scratches. Cost would probably be a couple hundred.

    Everyone talking about how BMW it looks because of the kidney grill. It could just be the emblem they're covering up, and just using the camo from top to bottom of the grill. I'll wait until it gets revealed to make any judgements.
  8. Best Dealer In SoCal for Warranty Work?

    Although my car is out of warranty, I'd like to know a good Socal dealer to go to for TSBs or like the 10 year AC warranty stuff. I've done all the maintenance myself because of the reasons above. I did however made a trip to Weir Canyon Honda because I lost my wheel locks (without an...
  9. Ceramic Coating Questions

    Anyone try Avalon King's ceramic coating before?
  10. Type R Sport Line wing

    Just wondering if anyone knows how to get the Type R sport line wing that's available in the EU. Seems to me that one would have to swap out the tailgate spoiler on the FK7 for that assembly.
  11. My replacement tail light is loose

    I think you need to push really hard on the area that's loose to snap the "clips" into place.
  12. WTB: Lunar Silver Metallic Hood

    If anyone has a spare lunar silver hood w/o any damage laying around in Socal, I'm interested in it. Thanks!
  13. 27WON Front Strut Tower Bar

    @[email protected] Any info on the thread protrusion after the bolts are torqued down? It was brought up by @Fit2Hatch on post #21 of this thread. "Standard is:- after fastener is torqued to spec., there should have thread protrusion above top of fastened nut - in order to satisfied safety margin...
  14. Lowering Spring Install: Bolt Stuck

    I know you solved your issue, but mine came out with no issues. I think (stating the obvious at this point) it has to do with where you're located, snow, salt = corrosion that's making the bolt hard to remove.
  15. Pulled a taillight apart

    wow, seems lot more complicated than imagined. Excited to see what you come up with. I'd love to have some LED tailights, but aftermarket isn't cutting it for me.
  16. Request: Subframe torque specs

    I found that the rears were harder to line up than the fronts. I loosened all of them, but didn't remove them completely from their sockets, that way the subframe won't completely fall down, but had enough space to place the collars in. Lots of shifting subframe, tightening a bit, shifting...
  17. Mugen LED Tail Lights

    I bought them before, but noticed build quality was subpar, so I returned them. I probably would have gotten moisture like the post above with the ones I received (see pic).
  18. "Oil dilution settlement"

    I got it too. I think it's just lawyers wanting a payday from Honda, while we get pennies for this class action lawsuit.