fatherpain
Senior Member
- First Name
- Tom
- Joined
- Dec 22, 2018
- Threads
- 27
- Messages
- 2,205
- Reaction score
- 3,799
- Location
- SoCal
- Website
- www.civicx.com
- Vehicle(s)
- 2018 CTR - CW, 1996 Honda Accord EX coupe
- Build Thread
- Link
- Vehicle Showcase
- 1
- Thread starter
- #136
Had a little bit of time last night so picked up where I left off.
Pulled these 12mm and 10mm bolts. This front bracket needed to come off.
Close up on passenger side. This plastic push clip also needed to come off. Driver side was similar.
Bracket lift up and out. Set it aside.
Next prepped the plastic shroud for removal. Pulled this push clip.
And this push clip on the drivers side.
Then lifted the plastic shroud off and set it aside also.
With the radiator exposed, removed both of these metal tabs that secure it in place.
Removed the first with a 12mm socket.
Then the 2nd.
Removed both tabs and set aside.
Pulled these 12mm and 10mm bolts. This front bracket needed to come off.
Bracket lift up and out. Set it aside.
And this push clip on the drivers side.
Then lifted the plastic shroud off and set it aside also.
Last edited: