Infotainment software update?

[teletxt]

Hi Guys!

I made some screenshot about the current Europen HU version.

1. EUDM 4D sedan 2020.

2. EUDM 5D 1.5 Sport+ 2020 Premium 11 speaker Audio

3. EUDM TypeR 2020 Premium 11 speaker Audio

4. EUDM 1.5 Sport 2019 Nonfl 8 speaker standard audio

It seems the head unit itsefl is the same Mitsubishi MY16ADA device.

 

[teletxt]

Hi!

I uploaded the 197.70 HU version. The filename is MRC_EU_SW_v12_4.zip. This filename was given by Honda. Update for the EUDM hatch.

http://www.mediafire.com/file/43ggjrgioibnla9/MRC_EU_SW_v12_4.zip/file

 

[alexproshak]

Hi!

I uploaded the 197.70 HU version. The filename is MRC_EU_SW_v12_4.zip. This filename was given by Honda. Update for the EUDM hatch.

http://www.mediafire.com/file/43ggjrgioibnla9/MRC_EU_SW_v12_4.zip/file

Hi, will this upgrade my F197.00 as well on Civic 2016-17? I am looking for the solution which helps me with Android Auto audio....

 

[teletxt]

Hi, will this upgrade my F197.00 as well on Civic 2016-17? I am looking for the solution which helps me with Android Auto audio....

I upgraded mine from 1.F 196.48

 

[alexproshak]

I upgraded mine from 1.F 196.48

Did you use the one from the post above or another one? I am worrying that it is just for EU versions. I have US one. Will that also work?

 

[teletxt]

Did you use the one from the post above or another one? I am worrying that it is just for EU versions. I have US one. Will that also work?

I used what I posted.
Will it work on USDM?
I don't know. But I read in this topic earlier, someone has updated his USDM device (Hatch, or SI, I can't remember) with EU firmware successfully.
Maybe you should create a backup your recovery.rom image before update.

 

[alexproshak]

I used what I posted.
Will it work on USDM?
I don't know. But I read in this topic earlier, someone has updated his USDM device (Hatch, or SI, I can't remember) with EU firmware successfully.
Maybe you should create a backup your recovery.rom image before update.

Thanks, did you extract all the folders and put them into the USB as is or used just Swupdate big file?

 

[teletxt]

1. Format a pendrive to FAT32.
2.Extract the zip file contents to the root of the pendrive.
3.Plug the pendrive into the usb socket under the armrest.
4. Start Engine.
5. It's automatically find the updates and start uploading.

Here is document, with additional steps.

 

[alexproshak]

1. Format a pendrive to FAT32.
2.Extract the zip file contents to the root of the pendrive.
3.Plug the pendrive into the usb socket under the armrest.
4. Start Engine.
5. It's automatically find the updates and start uploading.

Here is document, with additional steps.

Yes, sure. That I know. I was doing that last year when updating to F197. 00. But that time there was just one big file. This time I see lots of folders... Was wondering if I need them also.

Anyway I'll give a try today. Thanks again

 

[teletxt]

Yes, sure. That I know. I was doing that last year when updating to F197. 00. But that time there was just one big file. This time I see lots of folders... Was wondering if I need them also.

Anyway I'll give a try today. Thanks again

Good luck with the update.
Keep us updated.

 

[alexproshak]

So I extracted the content to the root of pendrive, started the engine, plugged pendrive under the armrest and....nothing happened. Waited like 5 minutes.

My current firmware is F197.00. Is it supposed to automatically catch the installation file in one of the folders?

 

[teletxt]

So I extracted the content to the root of pendrive, started the engine, plugged pendrive under the armrest and....nothing happened. Waited like 5 minutes.

My current firmware is F197.00. Is it supposed to automatically catch the installation file in one of the folders?

Mine started automatically. In this case do what a the pdf shows.

 

[alexproshak]

I installed this firmware on my 2016 Civic EX-T and while the install seemed to go fine, all I have now is a black screen. I still get the backup cam in reverse, and change temps with the knob, but nothing else. Any suggestions before I call the dealer?

Hello, did you extract all the folders and place them in the root or just used the swupdate file (placed in root)? Didn't work for my 2016 sedan yesterday (I used the way of placing all the folders in the root).

My FW currently is 197.00

 

[teletxt]

Hi!

I placed all the folders on the root.
I got a mail form Honda Hungary, and they confirmed, this is the latest update for the HU.

 

[alexproshak]

Hi!

I placed all the folders on the root.
I got a mail form Honda Hungary, and they confirmed, this is the latest update for the HU.

Did you hold any buttons to start the update? TSB19-101 says to hold Vol-Power button to start the process after plugging the USB. Anyway, I'll try this in an hour

Sponsored