Post your aftermarket wheel/tire set up

[Gandalf]

Dude, what kinda wheels are those?

See post directly above yours. No snark intended.

Sponsored

 

[buggluv4439]

See post directly above yours. No snark intended.

Ok, I see, I see.

 

[KnoxTn17Si]

Man I'm blind, or I'm not knowing where exactly to look. Lol

Lol... I think I posted after you asked ?

 

[buggluv4439]

Lol... I think I posted after you asked ?

Ahhh, I see, I see. Looks good, man

 

[KnoxTn17Si]

Ahhh, I see, I see. Looks good, man

Thanks...

 

[Jimmou]

Titan 7 T-S5 wheels in satin titanium 18X8.5 +44, Michilen Pilot Sport A/S 3+ in 245/40.

Lower your car. I'd love to see how it sits. These wheels are at the top of my wanted list.

 

[KnoxTn17Si]

Lower your car. I'd love to see how it sits. These wheels are at the top of my wanted list.

I've been debating it for awhile now. If I do, I'm going with eibach pro kit.

 

[Cali831toCO719]

Just joined the forum but been reading a few different threads on the forum. Here's a pic of my Si debating on lowering it... but then I have to worry about the winter months....lol

 

[Cali831toCO719]

I've been debating it for awhile now. If I do, I'm going with eibach pro kit.

I keep going back and forth if I should do it. Cost wise it's cheaper not to do it lol. Car looks great!

 

[Nozomi135]

@Josh_FC3_Si on insta! JNC033 in Black Chrome from LaCroix Tuning in Quebec, CA, running on 18 x 9.5 +35 with 245/40/18 Firestone Firehawk Indy 500's from 4Tires.ca! Eibach ProKit pending install because of Covid so she'll be getting some low soon enough!

 

[arpypat]

Motegi MR146. 18x9.5", 45mm. 245/40's.
Running almost no negative camber in the rear now (.9°). I put the center cap gel stick-ons on the wheels to break up all that bright silver! Very happy with this set up, no rubbing with my now "rolled flat" rear fender lips.

Dope! I was looking at 18x9.5" wheels with +45 offset but I was worried about being 14mm closer to the strut compared to 18x8 +50 wheels.

Did you have to do the 0° rear camber in order to not rub on the suspension components?

Also, I have an Si sedan, so not sure how the inner wheel well looks like for a hatch compared to sedan.

 

[SonicBreezerST160]

Dope! I was looking at 18x9.5" wheels with +45 offset but I was worried about being 14mm closer to the strut compared to 18x8 +50 wheels.

Did you have to do the 0° rear camber in order to not rub on the suspension components?

Also, I have an Si sedan, so not sure how the inner wheel well looks like for a hatch compared to sedan.

I too don't know how much room the sedan has. I only took out the negative camber to save tire wear. I had no issues inboard, even with -2.7°

 

[se7encrows]

Went with a 235/40r18 +45 with new Conti DWSs on my 2016 EX-T.

 

[KungPowHau]

ESR SR11 18x8.5 +30 with 235/40/18
It’s a nice daily driver fitment.

 

[brownman]

18 x 9.5 +35 with 245/40/18

any rubbing on this set up?

Sponsored