DIY Rally Armor Mud Flap Install

RatedR

Senior Member
Joined
May 17, 2017
Threads
29
Messages
382
Reaction score
838
Location
Atlanta, GA
Vehicle(s)
1992 Integra GS-R (sold). 2000 Integra Type R (sold). 2017 Civic Type R.
Country flag

mrcivictyper

Senior Member
Joined
Feb 7, 2018
Threads
3
Messages
58
Reaction score
44
Location
San Diego, CA
Vehicle(s)
18 CW CTR
Country flag
No. When I did mine the Hatchback Sport mudflaps weren't out yet so I used the regular Civic ones. Those should work much better I would assume.
I tried out the hatchback sport splash guards (08P00-TGG-100A). They look a bit taller and shape is different from what RatedR has on his CTR. I got them from ebay for 79 bucks shipped from a Honda Dealership in MD. I have only install the fronts for now. The rears seem to fit when I hold them up against the screw holes.

I did need to shave off some of the plastic in order for them to fit. I wouldn't say they first perfectly as there is a small gap. You can see the gap in the pictures. Overall I'm happy with them so far. I like the OEM look.

I'll also show a before and after picture of what I trimmed off.

Honda Civic 10th gen DIY Rally Armor Mud Flap Install R9S1tHD5c3dDflcbqAhkBEHZRN3IgG-E4xb2L0PClp4TRPZV3MqEO7qKhc5s5oKkOU6BAGqMdWruUZqE9Yh=w663-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install -3OqTaUZZXZRh9LUq-Y1hL4uPQExBwUYveVc05rfg-cuIX2poqJ5ts9N-HXMZ66NUr4oX8EHuVkaFNIC6D=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install 5Z81G_bMtmT-40eOGDBY8dG6ze77b4EdR76DeN7Jp7TXAD_gGL6YH5qvy7GHAZ0tsWfUt9Rv91GvVQ5TrS=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install QEt8xjuCYMspQmIs_GwJQqeJhHZyMrDHvtRLZYVqL0VZeWOHkfXhXf07P6JBiar2so6sWxw0uD3j5LBKot=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install e9X1jNTohEI0tXNT0NNdp7BB0UJOYn2YsdtjGB6OCCw2dUj-TNmFYs8jVZTaIZ3IRo3j3MFpDf9vUawHKKX=w663-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install Lmz18StpWu_n0ds3XqJvfVx7JZ0UJ8EoChiZjYFYLDmjCPrcU0kbM1nobu8UDsIJyI74-ZiP-PDe9f8Y_--=w663-h883-no
 
Last edited:

98-0425

Senior Member
First Name
Nick
Joined
Jun 18, 2017
Threads
146
Messages
1,484
Reaction score
1,224
Location
Las Vegas
Vehicle(s)
18 Civic Type-R #12307, 98 Integra Type-R #0425, 07 Pilot EX-L, 17 Pilot Elite
Country flag
I tried out the hatchback sport splash guards (08P00-TGG-100A). They look a bit different (their shape) from what RatedR has on his CTR. I got them from ebay for 79 bucks shipped from a Honda Dealer in MD. I have only install the fronts for now. The rears seem to fit when I hold them up against the screw holes.

I did need to shave off some of the plastic in order for them to fit. I wouldn't say they first perfectly as there is a small gap. You can see the gap in the pictures. Overall I'm happy with them so far. I like the OEM look.

I'll also show a before and after picture of what I trimmed off.

R9S1tHD5c3dDflcbqAhkBEHZRN3IgG-E4xb2L0PClp4TRPZV3MqEO7qKhc5s5oKkOU6BAGqMdWruUZqE9Yh=w663-h883-no.jpg

-3OqTaUZZXZRh9LUq-Y1hL4uPQExBwUYveVc05rfg-cuIX2poqJ5ts9N-HXMZ66NUr4oX8EHuVkaFNIC6D=w1178-h883-no.jpg

5Z81G_bMtmT-40eOGDBY8dG6ze77b4EdR76DeN7Jp7TXAD_gGL6YH5qvy7GHAZ0tsWfUt9Rv91GvVQ5TrS=w1178-h883-no.jpg

QEt8xjuCYMspQmIs_GwJQqeJhHZyMrDHvtRLZYVqL0VZeWOHkfXhXf07P6JBiar2so6sWxw0uD3j5LBKot=w1178-h883-no.jpg

e9X1jNTohEI0tXNT0NNdp7BB0UJOYn2YsdtjGB6OCCw2dUj-TNmFYs8jVZTaIZ3IRo3j3MFpDf9vUawHKKX=w663-h883-no.jpg

Lmz18StpWu_n0ds3XqJvfVx7JZ0UJ8EoChiZjYFYLDmjCPrcU0kbM1nobu8UDsIJyI74-ZiP-PDe9f8Y_--=w663-h883-no.jpg
You have me sold
 

mrcivictyper

Senior Member
Joined
Feb 7, 2018
Threads
3
Messages
58
Reaction score
44
Location
San Diego, CA
Vehicle(s)
18 CW CTR
Country flag
I put on the last 2 splash guards on my ctr (rear). There was less shaving of the plastic this time (shown in first picture left side). Again, it is not a perfect fit so keep this in mind. There are no issues with the fronts and the rears seem to be more secure. I did not use the metal bracket that came along with the kit. I did not want to drill into the side skirts so I screwed it into the side skirt facing the fender side instead. In the event, I need to remove the splash guard, there won't be two holes facing the side of the car. If you download the installation guide, you will know what I mean. There is a plastic clip that didn't line up so I did zip tie it. You can see it in the pictures.

Honda Civic 10th gen DIY Rally Armor Mud Flap Install iSz9Mp-kSnDoa18qwgfcmeMRn8se60UMd2_FpoiQX8zW3i2zINxLClQ1nWfMF4FimOma_XXnT7rhxbBiiG=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install cmB67G91sSlZZh3fVLIPysBOKJv-nXX_zbEJP4cJPrdYb_kELcXL_HSZ3brqLFl7sCoLSV4dFBpRhze8ny=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install 7xbM98f4J5ts8tcQmKkXPab77xiVYBwkS-jR7S2iMwfa6coGOfDqPG7pA8HKMthi1Qy-g_q1gqnh8gRGHQ=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install OlMVekJvWJ07zXZGZDqgQutpZj5PAHYhDVvZjdY59XR7BqxKiOgDPOMpxz55QuuPg8rCpnrlrvAT5boC2a=w1178-h883-no


Honda Civic 10th gen DIY Rally Armor Mud Flap Install r85LzMSWoQhIyCRnfSEW0lnCPETP4vk3zq6AnhN9FmXTHqqpuSS51iW6KvkNDAP-P6Y73ycH0ryKLuzv3PL=w663-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install ZGEXCvOMM4TpqKwpViJtVhuJCYXsJgfQiHxWD-QwYJqj4LAbb7wT1u3uLDT9C7Sz6jIf7QemRg-V7UMUPe=w1178-h883-no

Honda Civic 10th gen DIY Rally Armor Mud Flap Install wErHF_vke-11Ggve-jNrY7Ik5oAExtIFOtwJfBsNobRVDIa6kfhF3_xtsRbQQ2m9WdDncJCicmFo3UYIJ4K=w663-h883-no


Honda Civic 10th gen DIY Rally Armor Mud Flap Install uclCpIPgbZeBADtsnNIei82fvhc9aX93Qg7dENs1dRH0IT0zG-Nqv4_9WSGgB3liT4LbrlAU-GZhAkYPFd=w1920-h720-no
 


hikaru

Senior Member
First Name
Shawn
Joined
Mar 18, 2018
Threads
15
Messages
1,016
Reaction score
586
Location
Marietta
Vehicle(s)
2018 Civic Sedan 1.5T, 2009 Accord Sedan 2.4 LX-P, 2000 Civic Sedan EK4
Vehicle Showcase
1
Country flag
I tried out the hatchback sport splash guards (08P00-TGG-100A). They look a bit taller and shape is different from what RatedR has on his CTR. I got them from ebay for 79 bucks shipped from a Honda Dealership in MD. I have only install the fronts for now. The rears seem to fit when I hold them up against the screw holes.
Honda makes at-least 3 different versions, tall/slim and low/wide, for the front, then it'd be more if you include the sport hatchback, regular hatchback Si Coupe and Si Sedan.

I think the low wide version works the best.

Sedan and Hatchback
Honda Civic 10th gen DIY Rally Armor Mud Flap Install 08p00-tba-1002_750x562

Honda Civic 10th gen DIY Rally Armor Mud Flap Install 08p00-teg-020-


Coupe
Honda Civic 10th gen DIY Rally Armor Mud Flap Install 08p00-tbg-100_750x640
 

CTR_TCB

Senior Member
First Name
Huey
Joined
Sep 16, 2018
Threads
2
Messages
58
Reaction score
27
Location
Orange County, CA
Vehicle(s)
2016 Honda Pilot Touring AWD
Country flag
I put on the last 2 splash guards on my ctr (rear). There was less shaving of the plastic this time (shown in first picture left side). Again, it is not a perfect fit so keep this in mind. There are no issues with the fronts and the rears seem to be more secure. I did not use the metal bracket that came along with the kit. I did not want to drill into the side skirts so I screwed it into the side skirt facing the fender side instead. In the event, I need to remove the splash guard, there won't be two holes facing the side of the car. If you download the installation guide, you will know what I mean. There is a plastic clip that didn't line up so I did zip tie it. You can see it in the pictures.

wErHF_vke-11Ggve-jNrY7Ik5oAExtIFOtwJfBsNobRVDIa6kfhF3_xtsRbQQ2m9WdDncJCicmFo3UYIJ4K=w663-h883-no.jpg
Hi just a quick question on your rear installation. Is it adjusted full up, mid, full down (relative to the upper attachment slot)? Did you enlarge any of the slots? On the lower slot which did not line up with the oem fastener -- how did you attach it? Thanks
 

jinderC

Hmmm, maybe I’m the only one but I dislike the look of mudguards.
PPF for the win
 

mrcivictyper

Senior Member
Joined
Feb 7, 2018
Threads
3
Messages
58
Reaction score
44
Location
San Diego, CA
Vehicle(s)
18 CW CTR
Country flag
Hi just a quick question on your rear installation. Is it adjusted full up, mid, full down (relative to the upper attachment slot)? Did you enlarge any of the slots? On the lower slot which did not line up with the oem fastener -- how did you attach it? Thanks
Hi, I used the existing holes and did not drill any new ones on the splash guard. It lined up with the screws that hold on the bumper. I did not enlarge any of the holes. I only had to shave off some of the plastic on the splash guards so that it would fit. There was one hole which is shown in the picture above that I did not alight right and I used a zip tie to hold it in place. I used the screws that came with the splash guards. I hope I answered your questions. I have not had any issues for the past 3 months I've had them on.
 

CTR_TCB

Senior Member
First Name
Huey
Joined
Sep 16, 2018
Threads
2
Messages
58
Reaction score
27
Location
Orange County, CA
Vehicle(s)
2016 Honda Pilot Touring AWD
Country flag
Hi, I used the existing holes and did not drill any new ones on the splash guard. It lined up with the screws that hold on the bumper. I did not enlarge any of the holes. I only had to shave off some of the plastic on the splash guards so that it would fit. There was one hole which is shown in the picture above that I did not alight right and I used a zip tie to hold it in place. I used the screws that came with the splash guards. I hope I answered your questions. I have not had any issues for the past 3 months I've had them on.
Thanks mrctr. I On the lower front attachment location (not the bottom with zip tie), is there a fastener provision or did you have to add one? I cannot see it.

Honda Civic 10th gen DIY Rally Armor Mud Flap Install Screen Shot 2018-12-27 at 10.33.30 AM
 


mrcivictyper

Senior Member
Joined
Feb 7, 2018
Threads
3
Messages
58
Reaction score
44
Location
San Diego, CA
Vehicle(s)
18 CW CTR
Country flag
Thanks mrctr. I On the lower front attachment location (not the bottom with zip tie), is there a fastener provision or did you have to add one? I cannot see it.

Screen Shot 2018-12-27 at 10.33.30 AM.png
I just made a tiny hole into the faux carbon-fiber with a pick and finished it off with a hand tighten screw.
 

luthacris

@Luthacris
First Name
Chris
Joined
Oct 14, 2018
Threads
1
Messages
21
Reaction score
26
Location
Dove Canyon
Vehicle(s)
2018 CW CTR #19009
Vehicle Showcase
1
Country flag
If done right it looks good. Of course I’m running 18x10’s and 255/40 x18 Michelin PS4’s...

Honda Civic 10th gen DIY Rally Armor Mud Flap Install 98A5D6E9-C7E7-4918-B095-D42D04F21DBE


Honda Civic 10th gen DIY Rally Armor Mud Flap Install E6D7EAC1-460A-42B7-B17B-3478B8B6E929


Honda Civic 10th gen DIY Rally Armor Mud Flap Install 6439C136-03F4-491B-9E97-E45C36AD7E1F
 

newskate9

Senior Member
First Name
Stephen
Joined
Oct 23, 2018
Threads
33
Messages
259
Reaction score
231
Location
PA
Vehicle(s)
19 Type-R, 16 Honda Pilot Elite
Country flag
HI all, I know this thread is almost a year old - any new learnings on the molded splash guards? I'm ready to do this now.

BUMP
Sponsored

 
Last edited:


 


Top