k20martinez
Senior Member
- Joined
- May 11, 2017
- Threads
- 1
- Messages
- 113
- Reaction score
- 52
- Location
- Peoria Arizona
- Vehicle(s)
- 2016 Honda Civic EX
I am going to be trying this soon going to a junk yard to test a k24, and j32 throttle bodies with drive by wire. Might also have to take out my throttle body spacer because of the limited space that we have there. Also a little hesitant don’t know if it will run ok with the ktuner and not running a customer tune after the install.Yes. 4 bolts. It's been rumored that you can swap with the K24's, if not, there's an adapter that allows for pretty much any TB. Also porting, polishing, and coolant bypass to reduce IAT. One of the things I haven't don't yet as it could involve some fabrication and I'd like to keep mine in a position to be able to swap back to stock if I end up trading it in. If I found solid evidence of someone swapping it out, straight bolt on, I wouldn't hesitate.
Sponsored