MAPerformance Prototype Intake Design

Status
Not open for further replies.

MAPerformance

Senior Member
Joined
Nov 30, 2017
Threads
103
Messages
711
Reaction score
1,331
Location
Cottage Grove, Minnesota
Website
www.maperformance.com
Vehicle(s)
2017 SI Coupe
Country flag
Hey guys! Got some more pictures for you, we are testing a couple different things on the intake but tentatively this is looking like our design. We actually are going to be running a stock MAF housing size which is different than what we had initially thought but there are reasons behind this that I don't want to dive into too deep at the moment, but we are going to be testing an upgraded MAF housing shortly with more details on that later!

Honda Civic 10th gen MAPerformance Prototype Intake Design 28795710_10213900241114058_2756405369055649877_n

Honda Civic 10th gen MAPerformance Prototype Intake Design 28577780_10213900241674072_2394025956576829453_n

Honda Civic 10th gen MAPerformance Prototype Intake Design 28577530_10213900241354064_7321391839445239045_n
 

davemarco

Senior Member
Joined
Jun 3, 2017
Threads
148
Messages
2,638
Reaction score
1,458
Location
SoCal
Vehicle(s)
2019 Civic Type R (CBP), 2013 Audi TTRS
Country flag
Am I correct in assuming that this will be a CAI with the filter part of the way down to the wheel well, to make it harder to hydrolock?
 

maddmatt02

Senior Member
Joined
Jan 11, 2017
Threads
29
Messages
887
Reaction score
525
Location
marysville, wa
Vehicle(s)
2017 civic ex-t 2016 crv lx 2001 accord ex 1997 integra gs
Country flag
how are the intake temps with that? I'd built a custom 3.5" intake that was that same basic design but ended up stuffing my filter back in the wheelwell and hogging out some holes in that fake grille to get the temps closer to ambient.
 

odinist

Senior Member
First Name
Matt
Joined
Mar 27, 2018
Threads
29
Messages
331
Reaction score
319
Location
OKC
Website
www.mithgarthr.com
Vehicle(s)
2018 Aegean Blue Si Sedan
Vehicle Showcase
1
Country flag
how are the intake temps with that? I'd built a custom 3.5" intake that was that same basic design but ended up stuffing my filter back in the wheelwell and hogging out some holes in that fake grille to get the temps closer to ambient.
Do you have any pics or a build write-up? What did you use for the MAF housing?
 

maddmatt02

Senior Member
Joined
Jan 11, 2017
Threads
29
Messages
887
Reaction score
525
Location
marysville, wa
Vehicle(s)
2017 civic ex-t 2016 crv lx 2001 accord ex 1997 integra gs
Country flag
Do you have any pics or a build write-up? What did you use for the MAF housing?
Well, this is making the first version.



Then these 2 are about going to full CAI and then opening the grille on top of that. I can confirm that running my first version was still way better at keeping IATs low compared to the stock box w/o resonator below it... I am in mexico again right now running that setup and IAT is absolutely horrible. It's 83 outside and driving through town IAT gets in the high 140s consistently, and is not quick to drop.



 


odinist

Senior Member
First Name
Matt
Joined
Mar 27, 2018
Threads
29
Messages
331
Reaction score
319
Location
OKC
Website
www.mithgarthr.com
Vehicle(s)
2018 Aegean Blue Si Sedan
Vehicle Showcase
1
Country flag
Where did you get the MAF housing?
 

maddmatt02

Senior Member
Joined
Jan 11, 2017
Threads
29
Messages
887
Reaction score
525
Location
marysville, wa
Vehicle(s)
2017 civic ex-t 2016 crv lx 2001 accord ex 1997 integra gs
Country flag
Status
Not open for further replies.


 


Top