Jazzek
Member
- Joined
- Jan 29, 2017
- Threads
- 0
- Messages
- 34
- Reaction score
- 46
- Location
- Florida Panhandle
- Vehicle(s)
- 2017 Civic Coupe EXT, 2003 Taco
- Vehicle Showcase
- 1
Basically you have to do multiple coats fast and get all the tape off immediately while while the dip is still wet.how did you get the plasti dip to not peel up when removing the tape?
So first coat would be kinda light just covering the area, still see some color through. Start at one end work to other, then immediately back for second coat. Second coat should generously cover paint. Third coat same method, thick application for durability. Check and finish any spots then immediately pull tape. I'm sure there's a vid somewhere.
I messed up my first try cause I timed like 1 minute between coats. After the 3rd coat the 1st one was dry enough to start peeling. So just don't wait and it will be clean.
If you want, practice some basic lines to get the feel so you don't have to re-tape and sheet a big section like I did lol
Sponsored