19CivicSportNH
Senior Member
I got to drive past a waterfall and didn't have to even go to paradise! Having the dash cam does record some "interesting" situations.
Sponsored
It looks like one of the cars stuck in the lake is either a new 11th gen civic (or Accord or Camry or 328i as they all look similar from that angle in a blurryish video).I got to drive past a waterfall and didn't have to even go to paradise! Having the dash cam does record some "interesting" situations.
Looking good! Don't give more ideas. I just bought a spare set of headlights for a retrofit. Though at least now I know why there was an opel hole when I routed my dash cam wire under the door sill (unless there is a plug missing).Have been doing these since last weekend.
Took my passenger side wheels to the shop for repair, meanwhile, I have my car jacked up with spare tires on (I use my other car's spare too, that's why I have 2 jacks and 2 spare tires)
While the car is on it's "leave", I decided to go on with the Honda Access Puddle Light project. Running the wire is relatively easy, once again, I prove that the accessory port at the fuse box works, even though the kit says it is made for 2019+ model years, it works just fine on my 2018. I'm embarrassed to say the hardest part of this project is to pop the side skirts off, I did follow the instruction, took off all the clips and screws, and attempt to slide it forward, but my weak arm just can't move it, so I called a friend for help, and it took him like 2 seconds and they're off lol
I'm being overly cautious here and taking my time, so even though I started since the weekend, it is still in progress, just right now I finished the installs on the skirts, and I'll wash everything well before I put it back on, that's for another day.
Picture time!
Right arrow is where the kit gets power from - the accessory port, left arrow is what the kit expanses, a new port for other accessories, like the wireless phone charger.
The wheels are back on today, the shop have again did a good job in restore the tinted clear
Skirt-less FK7 with the harness hanging, just need to clean it up and plug it on
The skirts with the puddle lights on, drilling holes are way easier with a cordless drill, and the Dremel do the cutting just fine
While running the harness, I broke a clip on the passenger front kick panel, thought it's a good time to also put on the emergency flare (Genuine Honda mount + Amon LED flare), that's what I interpret "JDM mod" lol as this is what cars in Japan have
Gotta wash it very soon and see how it lights up
O yea, one more thing, College Hill did exclude the Hatchback Sport/Sport Touring for application (https://www.collegehillshonda.com/2017-2021-honda-civic-hatchback-accessories/08V27-TBA-100.html). From what I can tell, it is probably because the sport skirt does not have the marking, and the template would not line up with it. There's also not any structure to tight up that short loose harness, but the harness is going to stay inside the skirt for sure, and just use common sense to locate the template, make sure both sides are on the same location, then the rest can just follow the instruction.
as I passed by our only Mexican restaurant in town, what do I see? 2 beauties! In a town of only 4,000, definitely rare to see 1 let alone 2.
You know it's a car forum when you read this and immediately think of Type R's instead of, you know, some other kind of beauties.
Any trouble with the vapor barrier? I'm about to pull the trigger on some Dyanamt to line the outer door skin.Installed a pair of Kicker 47ksmt2504 also known as Kicker Snowman today. Sound inside the cabin is improved.
No issues for me. I was able to roll some Noico sound deadening sheets inside.Any trouble with the vapor barrier? I'm about to pull the trigger on some Dyanamt to line the outer door skin.
How much they charge you?My hood was looking fairly pitted by rock chips and scratches from commuting so I stopped by Limitless Auto Lab in Stanhope NJ. He wrapped my hood in 3M carbon in about 30 mins. Reasonable on price and very accommodating on time. Start to finish about 30 mins. Some before and after pics attached. Going back for headlight wrap to break up the murdered out black on black.