What did you do to your Type R today?

[chrisz5z]

Hmm...is there a CR-V Honda hasn't told us about ?

Does look good though...especially since it was free

 

[hpbyhermann]

Added the Overland Designs guage hood and a PRL intake. Nice improvements.

 

[AlphaDigital]

I've been told I have a wheel problem

 

[Sup_Devil]

Ceramic tint, Suntek PPF and my custom key ring arrived ?

 

[abstrack702]

New 2020 garnishes , front and rear . I was able to re use my license plate relocator without having to cut into the vent .
Loving them

where did you purchase the garnishes

 

[SpicyPIXEL]

Installed this black “sound deadening” weather stripping I found off AliExpress - $20 total. Hopefully it’ll cut down on wind noise, like it says. No glue, the rubber has a channel that the rear passenger door edge fits into.

 

[typertimo]

What kind of blacked out headlights you got going on here? Tint film or aftermarket unit?

It’s just a tinted film. It fits perfectly . I’ve had it for almost a year and it’s still intact !

 

[typertimo]

where did you purchase the garnishes

College hills . I got lucky as it took so little time !

 

[Learn2turn:)]

I had to do the same thing and completely remove the PRL front pipe. One thing I did do though too is take a grinder to the end of that bolt so that if I ever have to take it out again I don't need as much clearance and could get away without removing the front pipe.

I just used a jack and 2 pry bars to get that RMM in, it was a serious fight because I REFUSED to loosen anything else!
Mine was just the Perrin inserts but they make it even more bulky and they POP OUT!!

I used the same angle grinder logic method that you arrived at. Good thinking Sir!
My front pipe is wrapped and 3in diameter. I was triumphant so I was pretty damn itchy afterward.

 

[type_ramen]

Installed this black “sound deadening” weather stripping I found off AliExpress - $20 total. Hopefully it’ll cut down on wind noise, like it says. No glue, the rubber has a channel that the rear passenger door edge fits into.

report back after a couple of driving sessions and link us then?

 

[MstrSHAKE]

did some sound deadening. Trying to get rid of this slight buzzzing at 2.5k’ish rpm in the rear of the car. It helped but just a little.


any other good spots?

 

[MadMage]

did some sound deadening. Trying to get rid of this slight buzzzing at 2.5k’ish rpm in the rear of the car. It helped but just a little.


any other good spots?

Seems like it would be easier to just downshift

 

[typertimo]

Not getting the LE but how bout this !!!
Mint

 

[AlphaDigital]

The DC chassis will forever be one of my favorites.

 

[NapalmEnema]

Installed this black “sound deadening” weather stripping I found off AliExpress - $20 total. Hopefully it’ll cut down on wind noise, like it says. No glue, the rubber has a channel that the rear passenger door edge fits into.

Report back on how it works out!