ByeVTEC
Member
- Joined
- Apr 18, 2017
- Threads
- 4
- Messages
- 37
- Reaction score
- 55
- Location
- Lancaster, PA
- Vehicle(s)
- 2017 Civic si
- Thread starter
- #1
Here's is what I sent to Hondata just moments ago:
I recently picked up a FlashPro for my si and have ran into some issues since flashing it. I uploaded the +6 psi w/ fts calibration on Friday without issues. Now, ever since flashing it, I get the attached image on my dash whenever plugging the FlashPro in by itself (NOT connected to a computer). Also, when plugged into my computer and vehicle, FlashPro Manager does not detect an OBDII or ECU connection. Every now and then I get it to detect, but it sometimes randomly goes away. I'd just like to note that that all software is up to date.
Now I am at the point where I just want to return it to stock, but am afraid to do so since the connection might get interrupted during the flash. I am also slightly worried that the flash somehow got messed up, because in normal mode during WOT, it builds boost but then drops down to 10 psi and doesn't really go over that. And unfortunately with my situation of the FlashPro not detecting the ECU, I am unable to datalog to make sure everything is running smoothly.
Has anyone experienced anything like this before?
I recently picked up a FlashPro for my si and have ran into some issues since flashing it. I uploaded the +6 psi w/ fts calibration on Friday without issues. Now, ever since flashing it, I get the attached image on my dash whenever plugging the FlashPro in by itself (NOT connected to a computer). Also, when plugged into my computer and vehicle, FlashPro Manager does not detect an OBDII or ECU connection. Every now and then I get it to detect, but it sometimes randomly goes away. I'd just like to note that that all software is up to date.
Now I am at the point where I just want to return it to stock, but am afraid to do so since the connection might get interrupted during the flash. I am also slightly worried that the flash somehow got messed up, because in normal mode during WOT, it builds boost but then drops down to 10 psi and doesn't really go over that. And unfortunately with my situation of the FlashPro not detecting the ECU, I am unable to datalog to make sure everything is running smoothly.
Has anyone experienced anything like this before?
Sponsored