Civic Type R After-market Wheel Guide

[SpicyMcFatburger]

Any news on if Volk G25s are going to fit the CTR?

Also, I know nothing about OZ wheels, how are they quality-wise? I like some of their designs, but have never seen them run on any car I know.

Sponsored

 

[Kami Speed]

Any news on if Volk G25s are going to fit the CTR?

Also, I know nothing about OZ wheels, how are they quality-wise? I like some of their designs, but have never seen them run on any car I know.

What size? There are sizes in the regular G25 as well as the Limited and Edge editions

 

[SpicyMcFatburger]

What size? There are sizes in the regular G25 as well as the Limited and Edge editions

I'd probably be looking at 19s, still trying to decide since I won't be making the switch until after the new year. It's between the G25s and the TE37s.

 

[Kami Speed]

I'd probably be looking at 19s, still trying to decide since I won't be making the switch until after the new year. It's between the G25s and the TE37s.

I'll have to double check brake clearance but these are the catalogue sizes available now

G25 Limited Edition:
19x8.5 +35 (25mm more poke than OE)
19x9.5 +50 (23mm more poke than OE)
19x9.5 +35 (38mm more poke than OE)

G25:
19x8.5 +36 (24mm more poke than OE)
19x9.5 +50 (23mm more poke than OE)
19x9.5 +36 (37mm more poke than OE)
19x9.5 +35 (38mm more poke than OE)

 

[SpicyMcFatburger]

Thank you! The black 19x9.5 +50s would probably be my choice. I'm wondering if there would be rub and if we'd need to shave the rears and roll the fronts to fit.

 

[Kami Speed]

Thank you! The black 19x9.5 +50s would probably be my choice. I'm wondering if there would be rub and if we'd need to shave the rears and roll the fronts to fit.

In this case it'll depend on what tires you run. 19x9.5 +42 fitment has been tested so you have the added clearance by going +50 so you won't any have major issues. But depending on the width and tire compound you run you may have some rubbing in the back

 

[SpicyMcFatburger]

In this case it'll depend on what tires you run. 19x9.5 +42 fitment has been tested so you have the added clearance by going +50 so you won't any have major issues. But depending on the width and tire compound you run you may have some rubbing in the back

Thanks for the insight. I appreciate it!

 

[HyperTorque]

Hi guys; what do you think of the Ferrada FR8 9 x et45.. would this go on ok?

Bronze, silver or anthracite

 

[Kami Speed]

Hi guys; what do you think of the Ferrada FR8 9 x et45.. would this go on ok?

Bronze, silver or anthracite

the width and offset will work, but you should contact Ferrada to ensure it clears the FK8 Brembo

 

[HyperTorque]

the width and offset will work, but you should contact Ferrada to ensure it clears the FK8 Brembo

Thanks... I have contacted Ferrada albeit they can't really comment given they haven't seen one to try. I want no rubbing and maximum width permissible ready for springs

 

[metal_driver]

Wow, I like the look of the black G25's and the Ferrara FR-8's..

 

[HyperTorque]

my other thoughts are the Rohana RF1 or RF2 20 x 9 ET35

 

[Kami Speed]

Grabbed off Facebook

Work MCO Racing Type CS in Red

18x9.5 +35 5x120
245/40/18

No rubbing according to the owner

 

[LongRun]

Eew I hate the combo of blue and red. I actually really like that shade of blue but decided against it for the CTR because of how it clashes with the red.

 

[Kami Speed]

ZE40 19x9.5 +45 5x120 with Federal 595RS-RR 265/35/19 courtesy of JHP

Sponsored