A Turbo Upgrade Has Come Out in China -- Over 300 HP with Other Mods

[Jerry]

Found this post on a Chinese social platform. So jealous, the seller says it's less than 1400 USD (approximately) to do it.

URL：
http://s.weibo.com/weibo/%E5%8D%81%...%A1%E8%BD%AE?topnav=1&wvr=6&b=1#1496428134735

Use some kind of website translator (bing?) to read it and the comments.

 

[Jerry]

From my understanding, they just modified the turbine blades (increase the size of it?), instead of upgrading the whole turbo. Here are some more pics.





They also upgraded the air intake, the whole exhaust system, and ecu of course, to achieve the result of 300 hp gain. The poster stated that they were able to push it to 320 hp after a custom tune.

The seller was also saying that the gain's too much for the CVT transmission. 260 hp would be a safe guideline, so basically it requires a tune as well.

 

[fiend busa]

On a stock clutch?

This makes me more excited for @VitViper's turbo

 

[JDM_DOHC_SiR]

From looking at that graph it looks like the following

Peak torque is at 4200~4300rpm and it's 290ftlb torque
and the torque comes on at 2500 rpm @ 210ftlbs

The best part from looking at it is the power pulls all the way to red line.... pretty much completely changed the whole power band of the car Very nice.. can't wait for what @VitViper comes up with after he does a little face roll tuning

 

[fiend busa]

I hope they post a video.

 

[fiend busa]

@Jerry,

Your link doesn't work.

 

[Jerry]

@Jerry,

Your link doesn't work.

Sorry, I just realized you have to register, log in, and change your region, in order to see it. I'll delete the link since it won't work.

 

[fiend busa]

Sorry, I just realized you have to register, log in, and change your region, in order to see it. I'll delete the link since it won't work.

Don't delete the link!

 

[Jerry]

Don't delete the link!

Ops, I already did. I'll put it back on when I have time later today.

 

[VitViper]

My plan is to have ours more affordable than that And USA made.

 

[Jerry]

My plan is to have ours more affordable than that And USA made.

Sounds fantastic.

 

[Sman]

From looking at that graph it looks like the following

Peak torque is at 4200~4300rpm and it's 290ftlb torque
and the torque comes on at 2500 rpm @ 210ftlbs

The best part from looking at it is the power pulls all the way to red line.... pretty much completely changed the whole power band of the car Very nice.. can't wait for what @VitViper comes up with after he does a little face roll tuning

yeah...i was looking at what the torque would be..........also wondering what it would be with the 320hp tune
Also the amount of hp doesn't matter for the CVT as much as the amount of torque

 

[fiend busa]

My plan is to have ours more affordable than that And USA made.

 

[Shankmeyster]

 

[jbatman1080]

wow

Sponsored