P2R Throttle Body Spacer | Available For 1.5L / 2.0L

kseriesparts said:

Increase horsepower and torque with this 3/4 inch throttle body spacer. Our spacer comes equipped with a 1/8th inch NPT threaded port at the bottom that can be used as an extra vacuum port or nitrous. Includes extended bolts, plug, and is anodized for a brilliant show-quality look.

https://www.kseriesparts.com/merchant.mvc?Store_Code=CR&Screen=PROD&Product_Code=P2R-P343-SLV
Power Rev Racing Throttle Body Spacer: Silver 1.5L Turbo

https://www.kseriesparts.com/merchant.mvc?Store_Code=CR&Screen=PROD&Product_Code=P2R-P343-RED
Power Rev Racing Throttle Body Spacer: Red 1.5L Turbo

-

https://www.kseriesparts.com/merchant.mvc?Store_Code=CR&Screen=PROD&Product_Code=P2R-P342-SLV
Power Rev Racing Throttle Body Spacer: Silver 2.0L

https://www.kseriesparts.com/merchant.mvc?Store_Code=CR&Screen=PROD&Product_Code=P2R-P342-RED
Power Rev Racing Throttle Body Spacer: Red 2.0L

Click to expand...

k20martinez said:

Bought this product for my 2016 Civic ex and it was sent to big told me they were going to get this fixed it's been 4 weeks and nothing yet

Click to expand...

kseriesparts said:

Can you give us a little more detail? What was tot big? Who told your they were going to fix it?

Click to expand...

kseriesparts said:

We just contacted P2R and they told us the new spacers are already milled for better fitment. They just need to get anodized and they will be sending you a new one out.

Click to expand...

k20martinez said:

Been over 40 days since this and I still haven't received any product I have a shipping label sent ans email no replys or update it's ridiculous

Click to expand...

kseriesparts said:

According to P2R they got them back from anodizing on Friday. So you should see your new on very shortly.

Click to expand...

saiyan1485 said:

Any new on shipment?

Click to expand...

kseriesparts said:

I will reach out to them right now.

Click to expand...

saiyan1485 said:

So i received my throttle body spacer and my engine made a knocking sound when i start the car. also all the pedals were shaking.. When i took the car for a drive it felt like the car wanted to shut off...Any idea why then would happen?

Click to expand...

360glitch said:

I'm not sure exactly what it takes to install one of these but you need to make sure that everything is sealed up, no leaks on the intake side. Make sure all sensors are securely plugged in and that you did not get anything dirty that you shouldn't have.

Click to expand...

saiyan1485 said:

Everything was in order. I dummy checked and triple checked. All the weird stuff happened after but when i took it out the odd stuff stopped. My car is back to normal just when i put the part in is where it happen. By the way the spacer is 5/8 thick and the gasket is 3mm or 4mm.

Click to expand...