Red H Emblems, who has them?

Well shit
I ordered these emblems from icbmotorsport.. and the reat emblem doesn't fit, and I'm unsure if I even wanna go forward with the front one..
Anyone with exp on a sedan?

slothy said:

Hi, everyone. So I've been doing a bit of research and talked to my buddy who lives and breathes this stuff. So depending on what body type of the civic you have, you will need a specifically sized emblem. If you're concerned about buying fake vs real emblems, ICB Motorsport does sell the real emblems. Just make sure you're buying the correct emblems for your body type.

Body sizes (source):
2-door coupe - FC3/FC4 (emblems)
4-door sedan - FC1/FC2 (emblems)
hatchback - FK7 (no emblems yet...)

Click to expand...

Reposting this AGAIN b/c it's clear no one reads through threads and just jumps the gun...

slothy said:

Reposting this AGAIN b/c it's clear no one reads through threads and just jumps the gun...

Click to expand...

They actually sent me the wrong ones I just reviewed the order just incase lol.

i even put the chrome emblem into the cardboard spot, and no fit there as well...
i didnt even assume these were fake, i just want my emblems on lol, but since it sounds like these are not the correct ones since my order asks for fc1/2..

Smellycat said:

i even put the chrome emblem into the cardboard spot, and no fit there as well...
i didnt even assume these were fake, i just want my emblems on lol, but since it sounds like these are not the correct ones since my order asks for fc1/2..

Click to expand...

I had to slightly trim the front pegs to sit snug on my grille. Some members have just removed them completely

Waiting on my hatch sport and I will be joining you guys..

Interesting, who here has expierience with this considering you shouldn't have to snap it off but due to it being jdm, it may ?

But according to poster above I shouldn't have to cut them since he thinks I am someone who ordered the wrong piece

Do the sedan badges fit perfectly on the hatchback has anyone figured that out yet ?

RED JDM part# & sizes
---------------------------------------------------------
75701-SLJ-003, W:131mm x H107mm
75700-S5T-E11,W:123mm x H100mm
75700-SNW-003,W:113mm x H:92mm
75700-SYY-003, W:108mm x H90mm
75700-SMT-E00, W:98.40mm x H:79.65mm
75701-SNW-003ZC,W:95.20mm x H:77.30mm
75700-S5T-E01, W:92mm x H:75mm
75701-S6M-Z01, W:86.13mm x H:69.73mm
75701-S1A-E11ZB, W:79.4mm x H:65mm
75701-TF0-003, W:92mm × H:75mm

10th gen civic oem emblem sizes
---------------------------------------
sedan:
front - 117mm x 96mm
rear - 108mm x 88mm

coupe:
front&rear - 117mm x 96mm

hatchback:
front - 117mm x 96mm
rear - 103mm x 85mm



most likely if youre ordering from icb they will send you 1x S5T-E11 and 1x SNW-003 for sedan/hatch...which is oversized

if you have seen @jonnys_honda build thread, those are the emblems he got and states they are too big but made it work by using more tape

in regards to whether or not you have to break the pins, it really doesnt matter...remember that these emblems are not made specifically for 10th gen civics so the pins may not line up and their only purpose is for alignment...the tape is what holds it in place

what are your options?
a) order emblems from icb like normal and make it work using more tape
b) go a size under (call/email icb stating which specific emblems you want)

*for hatch owners, either:
-wait til type r comes out so proper sized badges are released or
-make it work with what icb sends you or
-undersize and get snw-003 and smt-e00

Keep in mind those are older Jdm badging. The New TypeR may be different size or same size as newer civics

JrHonda said:

Do the sedan badges fit perfectly on the hatchback has anyone figured that out yet ?

Click to expand...

Read my post literally 6 posts above yours...

Where can I get the ones that fit the hatch? Just got a hatch sport in all black and can't wait to swap these out.

Jabdimus said:

Where can I get the ones that fit the hatch? Just got a hatch sport in all black and can't wait to swap these out.

Click to expand...

Read a few posts above yours. The sedan front emblem will fit but none of them will fit the back unless you trim the pins or add more tape. I have a new sport touring hatch and I've been waiting too...hatch owners will probably have to wait until the new type r stuff is out

Got my 3 piece set from below. The front and back are oem honda, the steering wheel is not.