LED turn signals

[Swordfish]

Has anyone tried some amber LED bulbs that do not have separate resisters that need to be seated that do not hyperflash ?

I'm looking to replace the front and rear turn signals with direct replacement LED bulbs. I've seen the ones currently being used that you pack in the resisters in the taillight. That's fine, however; the taillight assembly for this car, unlike prior models does not seal. It snaps in and is potentially exposed to the elements due to it's different fitment vs. prior models where you bolted it to the frame.

Sponsored

 

[Billy4202]

https://www.amazon.com/gp/product/B01LWSFFF5/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

They don't hyperflash, but one was defective out of the package. So my right signal is really bright AF and my left is stock. I'll change it one day lol. It was recommended by someone else here.

 

[Rob_13]

side note does anyone happen to know the size of the rear turn signals on a coupe?

 

[Swordfish]

side note does anyone happen to know the size of the rear turn signals on a coupe?

Bulb or type ? It's probably all the same stuff coupe or sedan

 

[Rob_13]

Bulb or type ? It's probably all the same stuff coupe or sedan

nope all the rear lights on coupe are different from sedan/hatch
i know the brake lights are 1156 and the reverse lights are h6w
if i remember the turn signal bulbs say something like 1156 but i couldn't get a normal 1156 to line up so hoping someone knows the actual exact size

 

[CosmicTouring]

Installed my LED Turn signals using Zevo Amber bulbs and low heat resistor from DIY: Car Modz. One resistor will work for both front and back at same time each side.

I have the Touring so only needed for rear turns but the same resistor will handle both front and back on non-Touring trims.

http://www.civicx.com/threads/led-t...esistors-w-oem-style-harness-all-trims.10290/

Sponsored